Remotus Mercury Receivers
Receiver RX - M182
Users can program the Remotus RX-M82 with 8 functions that are adapted to their needs. The RX-M82 is used to control machines for which speeds and number of movements are limited. Functionality is easily expanded. The receiver has 8 relay outputs as standard, 2 slots for expansion cards, and a serial COM port.
Receiver RX-M82
Users can program the Remotus RX-M182 with 18 functions that are adapted to their needs. The RX-M182 is used to control machines that must run at many speeds and perform many movements. Functionality is easily expanded. The receiver has 18 relay outputs as standard, 2 slots for expansion cards, and two serial COM ports.
Receiver RX-MS
The Remotus RX-MS uses serial communication. Rather than outputs as relays and analogue signals, functions are transmitted via a field bus to a programmable logic controller (PLC) that's installed in the machine / crane. Normally, the Remotus RX-MS is used for radio control of larger machines in which a PLC is installed. It can be used for control of cranes, overhead cranes and other machines. The functions are pre-programmed into the machine's PLC, and users can easily install the Remotus RX-MS and immediately start up the system. The control command is transmitted to the PLC using serial communication. PROFIBUS DP, MODBUS and S3964R. Customizable protocol (RS232 or RS485) is optional.
Download product data sheet - PDF
